APG’s C-4400 is a universal material for a wide range of applications. This material is resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants, and refrigerants. This material is manufactured with aramid fiber reinforced with a nitrile binder.
Performance
Max Temperature: 750℉
Continuous Max with Steam: 400℉
Max Pressure: 1450 psi
Properties
Resistant to Oils, Fuels, Hydrocarbons
Good Creep Resistance
Product Specifications
Typical Values Refer to 1/16'' Thick Material Unless Noted
| Creep relaxation ASTM F38B (1/32") | 20 % |
| Sealability ASTM F37A (1/32") | < 0.3 ml/hr |
| Gas Permeability DIN 3535/6 | < 0.5 ml/min |
| Compressibility ASTM F36J | 8 - 14 % |
| Recovery ASTM F36J | 50 % minimum |
| KLINGER Hot Compression Test | |
| 1 Thickness Decrease 73°F (23°C) | 1 14 % initial |
| 2 Thickness Decrease 572° F (300°C) | 2 20 % additional |
| Thickness Increase ASTM F146 after immersion in | |
| 1 ASTM Oil IRM 903, 5h/300°F (149°C) | 1 0 - 5 % |
| 2 ASTM Fuel B, 5h/73°F (23°C) | 2 0 - 10 % |
| Dielectric Strength ASTM D149-95a | 21.6 kV/mm |
| Density ASTM F1315 |
100 lb/ft ³ (1.6 g/cc ³) |
| Color |
Green |
Pressure/Temperature Graphs
The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.
pT diagram for thickness 1/16”:
Gases & Steam
Liquids
In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility
In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance.
In area 3 do not install gaskets in these applications without first contacting APG for technical support service.
APG : Nov 30, 2022 3:07:45 PM
APG’s C-4401SS - Synthetic Fibers Sheets with Nitrile Binder is a universal, general purpose gasket material that offers excellent sealability and...
APG : Nov 30, 2022 2:57:13 PM
APG’s C-4201 - Compressed Non-Asbestos Sheets with Nitrile Binder is a general application gasket material that offers excellent resistance to oils...
APG : Nov 30, 2022 2:59:43 PM
APG’s C-4324 Compressed Non-Asbestos Sheets with Nitrile Binder is a universal gasket material for a wide range of applications and is a good...
APG