APG’s C-4401SS - Synthetic Fibers Sheets with Nitrile Binder is a universal, general purpose gasket material that offers excellent sealability and chemical resistance along with good creep relaxation characteristics. This material is manufactured with synthetic fiber reinforced with a nitrile binder.
Performance
Max Temperature: 750℉
Continuous Max with Steam: 450℉
Max Pressure: 1400 psi
Features
Wire Reinforcement
Improved Stress Relaxation
Product Specifications
Typical Values Refer to 1/16'' Thick Material Unless Noted
| Creep relaxation ASTM F38B (1/32") | 20 % |
| Sealability ASTM F37A (1/32") | < 0.3 ml/hr |
| Gas Permeability DIN 3535/6 | < 0.5 ml/min |
| Compressibility ASTM F36J | 7 - 17 % |
| Recovery ASTM F36J | 50 % minimum |
| KLINGER Hot Compression Test | |
| 1 Thickness Decrease 73°F (23°C) | 1 15 % initial |
| 2 Thickness Decrease 572° F (300°C) | 2 9 % additional |
| Weight increase ASTM F146 after immersion in | |
| Fuel B, 5h/73°F (23°C) | 15 % maximum |
| Thickness Increase ASTM F146 after immersion in | |
| 1 ASTM Oil IRM 901, 5h/300°F (149°C) | 1 0 - 5 % |
| 2 ASTM Oil IRM 903, 5h/300°F (149°C) | 2 5 - 10 % |
| 3 ASTM Fuel A, 5h/73°F (23°C) | 3 5 - 10 % |
| 4 ASTM Fuel B, 5h/73°F (23°C) | 4 5 - 10 % |
| Dielectric Strength ASTM D149-95a | 14 kV/mm |
| Density ASTM F1315 |
112 lb/ft ³ (1.8 g/cc ³) |
| Color |
Green |
Pressure/Temperature Graphs
The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. However, chemical compatibility must also be considered.
pT diagram for thickness 1/16”:
Gases & Steam
Liquids
In area 1 the gasket material is suitable using common installment practices subject to chemical compatibility
In area 2 appropriate measures are necessary for installation of the gasket to ensure maximum performance.
In area 3 do not install gaskets in these applications without first contacting APG for technical support service.
APG : Dec 1, 2022 12:33:36 AM
APG’s C-4409 - Synthetic Fiber Sheets with Nitrile Binder has an expanded metal reinforcement. The galvanized low carbon steel insert makes this...
APG : Nov 30, 2022 3:11:35 PM
APG’s C-4430 - Aramid Fiber and Fiberglass Sheet with Nitrile Binder is a universal gasket material, suitable for a wide range of applications....
APG : Nov 30, 2022 3:09:41 PM
APG’s C-4408 - Aramid Fiber Sheets with a Nitrile Binder is a universal high-pressure gasket material for industrial applications. This material has...
APG